Tips For 3D Scanning Small Objects

(Last Updated On: December 27, 2020)

Scanning a small object is not a complicated task as long as you keep a couple of things in mind. Scanning not only requires your true attention but also requires you to be careful. Now, scanning large objects is easy, and the same is the case when scanning small ones. However, make sure to follow all the tips and tricks mentioned down below in order to 3D scan small objects for your convenience.

Make Sure To Use A Small Calibration Board

The first thing you need to do is to make sure to use a small calibration board. This will end up providing you with the results you are actually looking for. You need to configure your 3D scanner for a small field view. For this, you will need a 5mm or 10mm board in order to calibrate the scanner for small field view. This will end up providing you with the results you are actually looking for!

Get Rid Of External Factors

Another thing you need to focus on is getting rid of external factors. You need to have a sustainable 3D environment in order to get the best results possible. The thing is, when you are scanning an object, the vibration levels are actually magnified in order to can larger objects. If you scan an object on an area that not suitable, it is quite likely that you will end up with an inaccurate scan. You need to make sure to scan on a sturdy floor for best results. Moreover, make sure your object is placed on a solid table. The thing with this is that your will be able to easily hold your calibration board and will end up generating a more accurate scan. This way you will able to be able to move your product around when scanning in order to get different angles.

Do Not Spray Or Paint The Object

Now, another thing you need to keep in mind is to not spray or paint your object if that is possible for you. As small as 10-20 micron thickness sprays or even paints end up changing the shape of the object. This way, you are left with inaccurate scans. If you are looking for completely accurate scans, you need to stop spraying or painting the object. Take my word for it this makes a significant difference when it comes to 3D scanning.

Remember It Will Take Time

Scanning smaller objects take a lot of time compared to normal-sized ones. Keep in mind that the whole process will take time, and you might lose patience but you will have to hold and manipulate the object for extended period of time in order to get desired results. If you go too fast, you will end up ruining your scan, and that is something you do not want since you will have to go over the process again. So make sure to remember that it will take time!

Follow all the tips mentioned above when 3D scanning small objects. These will end up making the process a whole lot easier for you.

Leave a Reply

Your email address will not be published. Required fields are marked *